| 200RV2901 NSK ROLL NECK BEARINGS for ROLLING MILL | RG:3/8 NPT; S:4.763 mm; Bearing limiting speed:4000 r/min; H1:107.95 mm; R1:63.5 mm; P180°:36.9 kN; h:42.862 mm; Mass pillow block:32.2 kg; Cap bolt:2 x 3/4-10 UNC; Ca:67.793 mm; H2:44.45 mm; N1:19.05 mm; P60°:92.5 kN; End plug (suffix Y):EPR 8; H:209.55 mm; R2:26.988 mm; da:66.675 mm; Appropriate attachment bolt size G:0.625 in; Housing:FSAF 616; J1:53.975 mm; |
| 22240CAW33C3 SKF MINING MACHINERY BEARINGS | d:150 mm; D:270 mm; with cylindrical bore:2 800 min-1; B:54 mm; rs Dynamic (Cr):3 mm; Grease:2.690 kN; with tapered bore:1230 ; Pu:85.800 kN; Oil:2 400 min-1; B1:56 mm; Static (Cor):176.130 kN; |
| Z-508726.ZL FAG ROLL NECK BEARINGS for ROLLING MILL | Limiting speed:430 r/min; da max.:900 mm; Calculation factor e:0.28; B:365 mm; db min.:787 mm; Ba min.:26 mm; Calculation factor Y2:3.6; Reference speed:220 r/min; Calculation factor Y0:2.5; Fatigue load limit Pu:1700 kN; d2 ≈:900 mm; B5:141 mm; B2:112 mm; Mass bearing + sleeve:2045 kg; D:1220 mm; Da max.:1180 mm; D1 ≈:1080 mm; b:22.3 mm; Calculation factor Y1:2.4; K:12 mm; |
| 190RV2601 NSK ROLL NECK BEARINGS for ROLLING MILL | Weight:0.20 KGS; d:7mm; D:14mm; Cage Type:Steel; Clearance:Standard; Seals or Shields:Open Type; Availability:In Stock; SKU:687-zen; B:3.5mm; |
| NJ2336/C4 SKF MINING MACHINERY BEARINGS | Weight:0.01 KGS; Availability:In Stock; D:19mm; Seals or Shields:Open Type; B:6mm; SKU:607-fag; Dynamic Load Rating (kN):2.6; Limiting Speed Rating (r/min):38000; Reference Speed Rating (r/min):34500; Clearance:Standard; d:7mm; Static Load Rating (kN):1.1; Fatigue Load Rating (kN):0.053; Cage Type:Steel; |
| 370RV5211 NSK ROLL NECK BEARINGS for ROLLING MILL | Basic Dynamic Radial Load Rating C:216000 N; d:170.000 mm; B:42.00 mm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:2800 rpm; Basic Static Radial Load Rating Co:255000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2300 rpm; D:265.0000 mm; |
| 313824 KOYO ROLL NECK BEARINGS for ROLLING MILL | Clearance:C4; Dynamic Load Rating (kN):766; Seals or Shields:Open Type; Availability:In Stock; Limiting Speed Rating (r/min):1800; SKU:23128ejw33c4-timken; d:140mm; Weight:10.40 KGS; Reference Speed Rating (r/min):2100; Cage Type:Steel; D:225mm; Static Load Rating (kN):1070; B:68mm; |
| 23122CAW33C3 SKF MINING MACHINERY BEARINGS | Accessories:No Shield, no Seal; D:52.0000 mm; Sealed Speed Rating n3:8500 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:14600 N; d:20.000 mm; Grease Speed Rating n1:8500 rpm; Basic Dynamic Radial Load Rating C:22500 N; B:22.20 mm; Oil Speed Rating n2:12000 rpm; |
| Z-506962.ZL FAG ROLL NECK BEARINGS for ROLLING MILL | D:47mm; B:9mm; d:30mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):6.61; Speed Rating (r/min):29700; SKU:2mm9306wicrdul-timke; Availability:In Stock; Cage Type:Plastic; Static Load Rating (kN):9.54; Weight:0.05 KGS; Clearance:Standard; |
| Z-507336.ZL FAG ROLL NECK BEARINGS for ROLLING MILL | Clearance:Standard; Availability:In Stock; d:100mm; Static Load Rating (kN):678; Limiting Speed Rating (r/min):2300; Weight:6.60 KGS; D:180mm; Dynamic Load Rating (kN):554; SKU:23220kejw33-timken; Cage Type:Steel; Seals or Shields:Open Type; Reference Speed Rating (r/min):2700; B:60.3mm; |
| 23264CAW33C3 SKF MINING MACHINERY BEARINGS | h:165 mm; d2 max.:104 mm; l1 min.:95 mm; dk:60 mm; α:7 °; l7 min.:50 mm; d:45 mm; B:32 mm; Mass rod end:2.55 kg; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:200 kN; G:M 45x3; r1 min.:0.6 mm; l2 max.:219 mm; Basic dynamic load rating C:127 kN; C1 max.:28 mm; Material constant KM:330; |
| NU2328C3 SKF MINING MACHINERY BEARINGS | d:20 mm; d1 ≈:31.25 mm; B1:4 mm; B2:6.5 mm; Mass angle ring:0.017 kg; r3,4 min.:0.6 mm; |