| FAG HCS7011-E-T-P4S-DUL Precision Ball Bearings | Mass bushing:1.35 kg; h:86.5 mm; α:124 °; a:3.5 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; B1:8 mm; d:85 mm; D1:110 mm; Specific dynamic load factor K:25 N/mm²; |
| FAG 24048-B-MB-C4 Spherical Roller Bearings | Calculation factor f:1.15; Calculation factor f1:1; Static axial stiffness, preload class C:99 N/µm; Preload class C GC:280 N; d2:62.7 mm; Preload class A GA:70 N; Basic dynamic load rating C:19.5 kN; Db max.:78 mm; r1,2 min.:1 mm; Attainable speed for grease lubrication:19000 r/min; |
| FAG QJ218-N2-MPA-C4-F59 Angular Contact Ball Bearings | Basic Static Radial Load Rating Co:3800 N; d:35.000 mm; B:7.00 mm; D:47.0000 mm; Sealed Speed Rating n3:8000 rpm; Basic Dynamic Radial Load Rating C:4750 N; Oil Speed Rating Open/Shielded n2:16000 rpm; Fillet Radius ra:0.30 mm; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:13000 rpm; |
| FAG 7310-B-TVP-UO Angular Contact Ball Bearings | Fillet Radius rb:1.00 mm; B:45.00 mm; D:190.0000 mm; Basic Static Radial Load Rating Co:156000 N; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:4300 rpm; d:75.000 mm; Grease Speed Rating n1:3300 rpm; Basic Dynamic Radial Load Rating C:182000 N; |
| FAG NUP2211-E-TVP2-C3 Cylindrical Roller Bearings | Bearing:YAR 203-008-2F; Recommended diameter for attachment bolts, inch G:0.375 in; DN:6.5 mm; Recommended tightening torque for grub screw:4 N·m; Basic static load rating C0:4.75 kN; Db1:50 mm; d:12.7 mm; Recommended diameter for attachment bolts, mm G:10 mm; s1:15.9 mm; L:57 mm; |
| 140 mm x 210 mm x 45 mm FAG 320/28-X Tapered Roller Bearing Assemblies | a:3 mm; Permissible sliding velocity v max.:0.5 m/s; Tolerance shaft:e7; d:15 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.15; α:105 °; Specific dynamic load factor K:25 N/mm²; h:16 mm; Mass bushing:0.05 kg; Size (mm):140 mm x 210 mm x 45 mm ; |
| FAG 6006-TB-C3 Single Row Ball Bearings | Pu:25.850 kN; Static (Coa):212 kN; B:40 mm; rs (min):2.5 mm; r2s (min):0.6 mm; T:42.25 mm; d2:50 mm; C:33 mm; a:33 mm; D:110 mm; |
| FAG 6203-TB-P4 Precision Ball Bearings | Coefficient of friction µ min.:0.08; Mass bushing:0.018 kg; B1:3 mm; B:12 mm; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; Coefficient of friction µ max.:0.15; D:18 mm; D1:22 mm; Permissible sliding velocity v max.:0.5 m/s; |
| FAG NJ2213-E-TVP2-C3 Cylindrical Roller Bearings | r, r1,2 min.:0.3 mm; B:12.5 mm; Mass inner ring:0.023 kg; F:35 mm; d:30 mm; |
| FAG 6009-P6 Precision Ball Bearings | Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; Basic Static Radial Load Rating Co:250000 N; B:50.00 mm; d:110.000 mm; Basic Dynamic Radial Load Rating C:216000 N; D:240.0000 mm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:2700 rpm; |
| FAG C202HY8K3RC01 O-11 Precision Ball Bearings | r1,2 min.:1.5 mm; B:24 mm; d:90 mm; da max.:101 mm; s max.:3.5 mm; Basic static load rating C0:104 kN; ra max.:1.5 mm; Fatigue load limit Pu:12.7 kN; da min.:96 mm; D1 ≈:122 mm; |
| FAG 51276-MP Thrust Ball Bearing | Dynamic (Cr):4.5 mm; with cylindrical bore:1 500 min-1; rs (min):2.1 mm; D:300 mm; d:220 mm; B:60 mm; with tapered bore:1 900 min-1; Grease:1330 kN; Pu:680 kN; Static (Cor):8.3 mm; |
| FAG NJ2209-E-JP1-C5 Cylindrical Roller Bearings | J1:127 mm; P150°:185 kN; Stabilizing ring:2 x A8897; End plug (suffix Y):X-5217-4; Bearing:23048 CCK/W33; P180°:222 kN; N1:34.925 mm; R1:122.237 mm; Mass pillow block:245 kg; Cap bolt recommended tightening torque:2467.6 N·m; |
| 45 mm x 85 mm x 30,2 mm FAG 3209-B-2RSR-TVH Angular Contact Ball Bearings | d:100 mm; rs (min):1 mm; D1:102 mm; dynamic Cr:95.310 kN; static Cor:268.000 kN; Oil:2 700 min-1; D:135 mm; Grease:2 000 min-1; d1:135 mm; H:25 mm; Size (mm):45 mm x 85 mm x 30,2 mm ; |