| No. | Brand | E | S | A | s | K | N | M | L |
| 6211-2Z-L038-J22R-C3 | FAG | - | - | - | - | - | - | - | - |
| 2219-M | FAG | - | 4.763 mm | - | - | - | - | - | - |
| HCS7010-C-T-P4S-UL | FAG | - | - | - | - | - | - | - | - |
| HCS71924-C-T-P4S-DUL | FAG | - | - | - | - | - | - | - | - |
| NJ2217-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
| 6314-2Z-N | FAG | - | - | - | - | - | - | - | - |
| 32022-X-XL | FAG | 310.68 mm | - | - | - | - | - | - | - |
| NJ2207-E-TVP2 | FAG | - | - | - | - | - | - | - | - |
| NU305-E-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NU2332-E-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| 6202-Z-TVH | FAG | - | - | - | - | - | 60 mm | - | - |
| 6304-2RSR-L038-J22R | FAG | - | - | - | - | - | - | - | - |
| 7032-MP-UA | FAG | - | - | - | - | - | - | - | - |
| 7218-B-MP-UA | FAG | - | - | - | - | - | - | - | - |
| 61826-T-C3 | FAG | - | - | - | - | - | - | - | - |
| 240/500-B-MB-C3 | FAG | - | - | - | - | - | - | - | - |
| 3211-B-2RS-TNH-C3 | FAG | - | - | - | - | - | - | - | - |
| 51224 | FAG | - | - | - | - | - | - | - | - |
| HS7009-E-T-P4S-DUL | FAG | - | - | - | - | - | - | - | 511.175 mm |
| 23056-B-MB | FAG | - | - | - | - | - | - | - | - |
| 6215-2RSR-C2 | FAG | - | - | - | - | - | - | - | - |
| 24156-B | FAG | - | - | - | - | - | - | - | - |
| 6203-2RSR-L038 | FAG | - | - | - | - | - | - | - | - |
| NJ2238-E-M1 | FAG | - | - | - | - | - | - | - | - |
| N3038-M1-R150-230 | FAG | - | - | - | - | - | - | - | - |
| 51324-MP | FAG | - | - | - | - | - | - | - | - |
| 7319-B-TVP-UA | FAG | - | - | - | - | - | - | - | - |
| FAG 6304-2RSR-L038-J22R Single Row Ball Bearings | D1:127 mm; Limiting speed:5600 r/min; Fatigue load limit Pu:30 kN; T:45.5 mm; B:43 mm; Basic dynamic load rating C:233 kN; Reference speed:4300 r/min; a:36.018 mm; Calculation factor Y:1.1; Calculation factor Y0:0.6; |
| 170 mm x 280 mm x 88 mm FAG 23134-E1-TVPB Spherical Roller Bearings | d1:26.6 mm; r3,4 min.:0.3 mm; D:42 mm; Static axial stiffness, preload class B:36 N/µm; r1,2 min.:0.6 mm; B:12 mm; Mass bearing:0.056 kg; Preload class C GC:235 N; C3:1.9 mm; Attainable speed for grease lubrication:65000 r/min; Size (mm):170 mm x 280 mm x 88 mm ; |
| 100 mm x 215 mm x 47 mm FAG N320-E-M1 Cylindrical Roller Bearings | K:9 mm; d2 ≈:231 mm; B:112 mm; B2 ≈:140 mm; G1:21 mm; D:340 mm; ra max.:2.5 mm; B1:134 mm; Mass bearing + sleeve:48.5 kg; G:Tr 220x4; Size (mm):100 mm x 215 mm x 47 mm ; |
| FAG 7032-MP-UA Angular Contact Ball Bearings | F:20 mm; Mass inner ring:0.013 kg; d:17 mm; B:20 mm; r, r1,2 min.:0.3 mm; |
| FAG QJ212-MPA Angular Contact Ball Bearings | with tapered bore:2320 ; with cylindrical bore:3 200 min-1; Oil:2 700 min-1; B1:mm; Static (Cor):197.760 kN; B:73 mm; D:215 mm; Pu:77.900 kN; rs Dynamic (Cr):3 mm; Grease:2.780 kN; |
| FAG 7218-B-MP-UA Angular Contact Ball Bearings | End plug (suffix Y):EPR 18; Bearing:23034 CCK/W33; ba:64.294 mm; R2:38.1 mm; Initial grease fill:481.95 g; Housing:SSAFS 034 KA; Adapter sleeve assembly:SNW 3034x6; P90°:180 kN; Stabilizing ring:2 x SR-0-24; Eye bolt:2 x 3/8-16 UNC; |
| FAG 719/630-MB Angular Contact Ball Bearings | L:209.55 mm; End plug (suffix Y):EPR 3; P90°:12.5 kN; Da:85.001 mm; ba:22.225 mm; P60°:20.9 kN; N1:15.875 mm; Stabilizing ring:SR-9-0; Ca:28.804 mm; J min.:158.75 mm; |
| FAG 22314-E1A-K-M-C4 Spherical Roller Bearings | Fillet Radius ra:2.00 mm; B:55.60 mm; Sealed Speed Rating n3:2200 rpm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:159000 N; Grease Speed Rating n1:2200 rpm; Basic Static Radial Load Rating Co:146000 N; d:95.000 mm; D:170.0000 mm; Oil Speed Rating n2:3200 rpm; |
| FAG NJ2209-E-JP1-C5 Cylindrical Roller Bearings | J1:127 mm; P150°:185 kN; Stabilizing ring:2 x A8897; End plug (suffix Y):X-5217-4; Bearing:23048 CCK/W33; P180°:222 kN; N1:34.925 mm; R1:122.237 mm; Mass pillow block:245 kg; Cap bolt recommended tightening torque:2467.6 N·m; |
| FAG NJ320-E-M1 Cylindrical Roller Bearings | Grease Speed Rating n1:2200 rpm; Oil Speed Rating n2:3200 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:159000 N; d:95.000 mm; B:55.60 mm; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:146000 N; Sealed Speed Rating n3:2200 rpm; D:170.0000 mm; |
| FAG NU208-E-JP3-C3 Cylindrical Roller Bearings | Housing:SAFS 534; h:54.769 mm; Da:309.999 mm; Mass pillow block:165 kg; Initial grease fill:878.85 g; PG:1/4 NPT; Cap bolt:1-8 UNC; PosiTrac Plus contact element:2 x B10724-140; Appropriate attachment bolt size G:1 in; J1:107.95 mm; |
| 140 mm x 210 mm x 45 mm FAG 320/28-X Tapered Roller Bearing Assemblies | a:3 mm; Permissible sliding velocity v max.:0.5 m/s; Tolerance shaft:e7; d:15 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.15; α:105 °; Specific dynamic load factor K:25 N/mm²; h:16 mm; Mass bushing:0.05 kg; Size (mm):140 mm x 210 mm x 45 mm ; |
| FAG 16020-C3 Single Row Ball Bearings | Limiting speed:1200 r/min; Calculation factor Y0:1.6; Da max.:480 mm; K:9 mm; da min.:320 mm; Basic dynamic load rating C:3876 kN; Calculation factor Y1:1.7; Calculation factor e:0.4; B:200 mm; ra max.:4 mm; |
| FAG NJ2322-E-TVP2-C3 Cylindrical Roller Bearings | das:336 mm; Mass bearing:130 kg; Limiting speed:750 r/min; D:460 mm; d1 ≈:352 mm; Basic dynamic load rating C:3520 kN; r3,4 min.:4 mm; Da max.:443 mm; Reference speed:600 r/min; B:218 mm; |
FAG (Schaeffler) - S6205-2RSR-HLC - Motion Industries
Buy FAG (Schaeffler) Radial & Deep Groove Ball Bearings S6205-2RSR-HLC direct from Motion Industries. Your proven service leader with reliable delivery
FAG (Schaeffler) S6205-2RSR-HLC - Radial/Deep Groove
FAG (Schaeffler) S6205-2RSR-HLC - Radial/Deep Groove Ball Bearing - Round Bore, 25 mm ID, 52 mm OD, 15 mm Width, Double Sealed, C0 - - Amazon.com
S6205-2RSR - FAG Stainless Deep Groove - Quality Bearings
Product: S6205-2RSR | Brand: FAG | Size: 25x52x15mm | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
S6205-2RSR-HLC FAG • ABF Store
S6205-2RSR-HLC FAG. Deep groove ball bearings S62..-2RSR, main dimensions to DIN 625-1, with anti-corrosion protection, lip seals on both sides
FAG | S6205-2RSR-HLC | Applied
FAG S6205-2RSR-HLC. Item #100952311. each. Shipment Options. One Time Shipment. Auto-Replenish. Frequency. Select an Auto-Replenish Interval
S6205.2RSR.W203B FAG • ABF Store
S6205.2RSR.W203B FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in
FAG (Schaeffler) - 6205-2RSR-L038-C3 - Motion Industries
Radial/Deep Groove Ball Bearing - Round Bore, 25 mm ID, 52 mm OD, 15 mm Width, Double Sealed, Internal Clearance: C3. ... Radial/Deep Groove Ball Bearing - Round Bore, 25 mm ID, 52 mm OD, 15 mm Width, Double Sealed, Internal Clearance: C0. ... Radial/Deep Groove Ball Bearing - Round Bore
FAG S6205-2RSR Deep groove ball bearing S6205-2RSR
FAG S6205-2RSR Deep groove ball bearing S6205-2RSR Double Rubber Seals,Steel cage,single row,Origin: Germany Dimension:25x52x15mm weight:
Deep groove ball bearings - S6205-2RSR - medias - Schaeffler
S6205-2RSR. Deep groove ball bearings main dimensions to DIN 625-1, with anti-corrosion protection, lip seals on both sides
25 mm x 52 mm x 15 mm FAG S6205-2RSR Single Row Ball Bearings Video